Improper construction of rolling shutter doors may cause the following problems:
Uneven door body: Inadequate construction of the rolling shutter door may cause the door body to be installed unevenly, which will affect the opening and closing effect of the door body, making the door body unable to be fully closed or unable to be fully opened, causing inconvenience to use.
Unbalanced door roller shutter: Improper construction may cause the upper and lower roller shutters of the roller shutter door to be unbalanced, which will lead to unstable operation of the door body and may cause the roller shutter door to shake, loosen or even fall.
The gap between the plates is too large or too small: If the gap between the plates is inappropriate during construction, it will cause the plates to not fit completely or fit too tightly, affecting the sealing performance of the door body, resulting in air leakage, water leakage, etc. question.
Poor sealing performance: Improper construction of the rolling shutter door may lead to a reduction in the sealing performance of the door body, which cannot effectively isolate external factors such as sand, noise, and temperature, affecting the use of the door body.
The door and window system is unstable: If the guide rail of the rolling shutter door is not firmly installed or the accessories are not firmly connected, the door and window system will become loose, which will affect the normal opening and closing of the door and the safety of use.
The rolling shutter door does not work properly when encountering resistance: Inadequate construction may cause the rolling shutter door sensing equipment or the shutdown device to fail to work properly when encountering resistance, which will increase the risk of damage to the door body and also bring potential risks to the personal safety of users.
Decreased anti-theft performance: If the locks, closing parts, etc. of the rolling shutter door are not firmly installed or the quality of use is poor, the anti-theft performance of the rolling shutter door will be reduced, making the door body vulnerable to damage and intrusion.
Electric opening and closing system failure: If the installation of the rolling shutter door’s electric system is not standardized, the power wiring is wrong, etc., it will cause the electric opening and closing system to malfunction, making the door unable to open and close normally, affecting the convenience and safety of the user.
Reduced service life of the door body: Improper construction of the rolling shutter door may cause excessive wear, breakage and other problems of the door body components, thereby shortening the service life of the door body, requiring frequent replacement and repair, and increasing the cost of use.
Unsightly appearance of the door body: If the rolling shutter door does not pay attention to the appearance during construction, such as uneven painting, scratches on the surface of the door body, etc., it will cause the rolling shutter door to have an unsightly appearance and affect the overall decorative effect.
To sum up, improper construction of the rolling shutter door may lead to uneven door body, unbalanced rolling shutter, plate gap problems, poor sealing performance, unstable door and window systems, reduced anti-theft performance, electric opening and closing system failure, reduced service life, poor appearance Unsightly and a series of other problems. Therefore, during the construction process, the operating specifications must be strictly followed to ensure the construction quality to ensure the normal use and safety of the rolling shutter door.
Post time: Jul-26-2024