Rapid doors and rolling doors are common types of industrial doors. Once a fault occurs and needs to be repaired, the following preparations and work need to be done:
1. Determine the fault phenomenon: Before repair, it is necessary to confirm the fault phenomenon of the rapid door or rolling door, such as the door body cannot be opened and closed, abnormal operation, etc.
2. Prepare tools: The tools required for repair include wrenches, screwdrivers, power tools, etc., which need to be prepared in advance.
3. Safety measures: Before repair, it is necessary to ensure that the door body is in a stopped state and take corresponding safety measures, such as installing safety brackets and using safety belts.
4. Check the power supply: Check whether the power line where the door body is located is normal to eliminate the possibility of power failure.
5. Check the running parts of the door body: Check whether the running parts of the door body are normal, such as guide rails, transmission chains, motors, etc., to eliminate the possibility of mechanical failure.
6. Replace parts: If some parts of the door body are found to be damaged or aged, the corresponding parts need to be replaced.
7. Trial run: After the repair is completed, a trial run is required to ensure that the door body is operating normally, and make necessary adjustments and inspections.
It should be noted that for some larger maintenance work, such as replacing motors, replacing door bodies, etc., it is recommended to seek professional maintenance services to ensure safety and effectiveness.
Post time: Oct-18-2024