Garage doors are an essential part of every home with a garage. They provide security for your vehicle and other items stored in your garage. However, mechanical systems are prone to failure, and garage doors are no exception. In this case, knowing how to manually open your garage door is crucial. Here’s a step-by-step guide to help you through the process.
1. Release the garage door opener:
The first step in manually opening your garage door is to locate the release on the garage door opener. This release is usually a red cord that hangs from the garage door opener track. Pulling on this cord will disengage the cart from the connection point on the opener bracket, releasing the door for manual operation.
2. Close the garage door:
Make sure the garage door is fully closed before proceeding to the next step. This step is critical because trying to open the door when it is not fully closed could cause the door to fall or become misaligned. If your door doesn’t close completely, use the emergency handle located on the inside of the door to gently lower it to the ground.
3. Locate the manual release cord:
Once the door is fully closed, find the manual release cord. This wire is usually attached to the door near the center of the garage. It’s usually made of red cord, like the release on a garage door opener.
4. Pull the manual release cord:
With the door closed and holding the manual release cord, pull the cord down in a straight motion. This action should cause the lock holding the cart door to loosen. When unlocked, the door can now move freely along the garage door track.
5. Lift the garage door:
To open the garage door, place your hands in the center of the sides of the door and lift it up smoothly. Be careful not to open the door too quickly or with too much force, as this could damage the door or supporting structure.
6. Keep the door open:
Once the garage door is fully open, you need to keep it open. If you have a locking mechanism, engage it to secure the door and prevent it from closing accidentally. In the absence of a locking mechanism, use a prop or wooden block to hold the door open.
7. Close the door:
To close the door, reverse the steps listed above. Start by removing the struts or blocks. Then, gently lower the garage door to the ground, placing your hands by the sides for support. After the door is fully closed, re-engage the manual release lock, garage door opener, and any other security mechanisms you may have.
in conclusion:
Knowing how to manually open a garage door is critical to ensuring you have access to your vehicle or belongings in an emergency. While most garage door openers have automatics, they can sometimes go wrong. Following the steps outlined above, you can easily manually open and close your garage door, allowing you to access your belongings safely and efficiently. Remember to always follow the safety precautions recommended by the garage door manufacturer to avoid any potential accidents or damage to your garage door.
Post time: May-16-2023