Aluminum sliding doors are a popular choice among homeowners due to their stylish design and durability. Over time, however, you may notice that your door no longer operates as smoothly as it once did. This can be due to a number of reasons, such as weather changes, wear and tear, or improper installation. The good news is that adjusting an aluminum sliding door is a relatively simple task that you can do yourself with the right tools and know-how. In this blog post, we’ll walk you through the steps on how to properly adjust your aluminum sliding door to ensure it operates smoothly and efficiently.
Step 1: Clean and inspect the track
The first step in adjusting your aluminum sliding door is to thoroughly clean and inspect the track. Over time, dust, debris, and even rust can accumulate in the tracks, causing the door to become stuck or difficult to open and close. Use a vacuum cleaner or brush to remove any debris, then wipe the tracks with a damp cloth to make sure they are clean and free of any obstructions. Check the tracks for any bends, dents, or other damage that could prevent the door from functioning properly.
Step 2: Adjust the scroll wheel
The next step is to adjust the rollers on the bottom of the door. Most aluminum sliding doors have adjustable rollers that can be raised or lowered to ensure the door is level and operates smoothly. Use a screwdriver to access the adjustment screw on the bottom edge of the door. Turn the screw clockwise to raise the door, and turn the screw counterclockwise to lower the door. Make some minor adjustments and test the door to see if it operates smoothly. Repeat as needed until the door moves easily along the track without sticking or dragging.
Step 3: Check alignment
Another common problem with aluminum sliding doors is that they can become misaligned over time, causing the door to not close properly or creating gaps that allow air and moisture to enter your home. To check alignment, stand in your home and look at the door from the side. The door should be parallel to the door frame and flush with the weatherstripping. If it is misaligned, use a screwdriver to turn the adjustment screws at the top and bottom of the door to adjust the door’s height and tilt. Again, make small adjustments and test the door to make sure it’s aligned correctly.
Step 4: Lubricate Tracks and Rollers
Once you have adjusted the alignment of the tracks, rollers, and door, it is important to lubricate the tracks and rollers to ensure smooth operation. Use silicone-based lubricant on the tracks and rollers, being careful not to apply too much as it can attract dirt and debris. Wipe off excess lubricant and test the door to make sure it operates smoothly. You may need to reapply the lubricant every few months to keep your door operating optimally.
By following these simple steps, you can tune up your aluminum sliding door and keep it running smoothly for years to come. If you find that your door is still not functioning properly after following these steps, you may need to contact a professional for further inspection and repair. With regular maintenance and upkeep, your aluminum sliding doors can continue to be a stylish and functional feature of your home.
Post time: Jan-08-2024