How long is the maintenance cycle of rolling shutter doors?

How long is the maintenance cycle of rolling shutter doors?

There is no fixed standard for the maintenance cycle of rolling shutter doors, but there are some general recommendations and industry practices that can be used as a reference:

Daily inspection: It is recommended to conduct daily inspections once a week, including checking whether the door body is damaged, deformed or stained, operating the rolling shutter door to rise and fall, observing whether the operation is smooth, whether there are any abnormal sounds, and checking whether the door locks and safety devices are working properly

Monthly maintenance: Maintenance is performed once a month, including cleaning the surface of the door body, removing dust and debris, checking whether there are foreign objects in the guide rails, cleaning the guide rails and applying an appropriate amount of lubricating oil, and checking whether the springs of the rolling shutter doors are normal and whether there are signs of looseness or breakage

Quarterly maintenance: Maintenance is performed once a quarter to check the operating status of the motor, including temperature, noise and vibration, check the electrical components in the control box to ensure good connections, no looseness and burning, adjust the balance of the door body, and ensure that the rise and the descending process is smooth

Annual maintenance: a comprehensive inspection is carried out every year, including a comprehensive inspection of the door structure, including connectors, welding points, etc., necessary reinforcement and repair, inspection of the insulation performance of the motor, repair or replacement if necessary, and functional testing of the entire rolling door system, including emergency stop, manual operation, etc.

Fireproof rolling door: For fireproof rolling door, it is recommended to perform maintenance at least once every 3 months to ensure its integrity, whether the control box can work properly, whether the guide rail package box is damaged, etc. At the same time, the motor, chain, fuse device, signal, linkage device and other components of the fireproof rolling door should be checked to ensure that its major components can operate normally

In summary, the maintenance cycle of rolling door is generally recommended to be a daily inspection every week, and maintenance and inspection of different degrees every month, quarter and year to ensure the normal operation of the rolling door and extend its service life. The specific maintenance cycle also needs to be determined according to the frequency of use, use environment and type of the rolling door.